hi, we are just getting started with a mb66 mill, with osp p300m

i prepared some dxf files with shapes ..

1) when i import closed contours from dxf to igf, i can not select the start point ... so, the process will start randomly, and not at a specific location
- how can i fix this ?
- also, the alternative to define the contour inside igf takes too long, even if you can select the start point

2) there is an option to define a start shape and a final shape, so the machine to cut between them.
I put there the shape before operation and the shape after, and it raised an error, because the 2nd shape was not 100%includes in 1st one, but it shared some elements.

So, i took the 2nd shape and i offset it inside, so to be included in 1st shape ...i got the error : shape to complicated

what do you think ? kindly

Similar Threads: