just ask Okuma. they will be happy to give it to you for free. At least our local Okuma guys are helpful. don't know about your local guys but can't hurt to ask.
Hello all,
We bought an LB300-W lathe used couple years ago. Needing to get spindle rebuilt now. Went to get the parts manual and they gave us a manual for a different lathe (LU15). So, anyone out there have a manual for an LB300? 10" chuck spindle. Only need the pages for the main spindle if anyone has a scanner. Or if interested in parting with the manual, let me know what you want for it.
Thanks!
Similar Threads:
just ask Okuma. they will be happy to give it to you for free. At least our local Okuma guys are helpful. don't know about your local guys but can't hurt to ask.
hello did you got the parts book? if not please let me know I have it but is too big to attach it thru this page but let me know and I can send the information that you need
Actually I got the manual from someone else about 2 hours before you posted that message hehe.. But thanks for the reply! Got what I needed now
Dear tea hole!
Please help me! I need a parts book for Okuma LB300 lathe machine. I would be grateful!
Thank you!
insufficient data to help here.
The LB300 had different iterations of machine and depending on options, one parts manual does not fit all I don't believe.
what options does the machine have?
hello there this is the droopbox link is the first time that I am trying to upload this kind of link hope this works
https://www.dropbox.com/s/hwmp42jaek...tbook.pdf?dl=0