Slant feed mode

[jamessiffel]

Can/how do you pulse handle when your drilling/milling on an angle with the milling head on a macturn/multus? I tried mid auto manual at the line where your feeding into the part, it only knows one axis at a time. Is there a way to do this?

[budgieW]

There is a slant feed button on the panel. You will need to have C and Y engaged

[jamessiffel]

Budgiew, could you please elaborate, as I know about the button and when I tried it c and y were activated. Thanks for replying so fast!

[Maxter]

Can/how do you pulse handle when your drilling/milling on an angle with the milling head on a macturn/multus? I tried mid auto manual at the line where your feeding into the part, it only knows one axis at a time. Is there a way to do this?

Select Parameter Screen and then select #3 on the menu display or "B-Axis User Parameter". Set your drill angle on the "Slant Feed Angle" line.
You must be in "Y Mode" and Mid Auto Manual mode (or Manual mode) before you can turn on the "Any Angle Feed Select" PB (next to Feed Hold PB) Use X on the handwheel if you are drilling on the main spindle side and Z on the handwheel if you are drilling on the Sub Spindle side.