I operate an Okuma GU 10 internal grinder that has the auto door with the safety function on, to close the door you have to hit two different buttons at once, then turn the wheel spindle on, THEN once the wheel is up to speed, you hit cycle start! Whew! When its done though it reads two different g codes which stop the wheel and automatically open the door. Is there a simple way to use the corresponding g codes to close the door, turn on the spindle, and start the program with just the touch of cycle start? I looked in the manual and in parameters, I don't see a way, but maybe someone more inclined might know a way? Thanks guys