OSP700L

[Antonio Arguijo]

Hello!
Someones knows how change the configuration chuck, as spindle or as axis, because after charge all software, we can't run the spindle or chuck 850 RPM more, the control is OSP700L but I don't have some manual to know what parameter must modify to increase the spindle speed.

[fordav11]

that speed could be the limit for the gear you are in. try changing to high gear.

[cnc machining]

At the MDI function try key in M3 S850 M42 then follow by cycle start.

[Antonio Arguijo]

that speed could be the limit for the gear you are in. try changing to high gear.

How change to high gear?

With M42 ?

[Algirdas]

M40 neutral, M41 slowest, M42 middle, M43 high (if your machine has three of them)

[Antonio Arguijo]

M40 neutral, M41 slowest, M42 middle, M43 high (it your machine has three of them)

Thnks a lot for your help!

Regards!