LinkBack URL
About LinkBacks
Our old 4VA could not rigid tap
We always had to use floating holders
& program the feed in units per minute, it couldn't do a G95
PS -- we couldn't even do ramping on an arc ( ie helix cutting a bore had to be done by point to point )
| | |
I have an older MC4VA with an OSP5000M-G controller. How do I know if I have rigid or sync tapping cycle? I have tried G284 but it errors on that. I am trying to run a large tap in and out twice and its off pitch on the second cycle...
Our old 4VA could not rigid tap
We always had to use floating holders
& program the feed in units per minute, it couldn't do a G95
PS -- we couldn't even do ramping on an arc ( ie helix cutting a bore had to be done by point to point )
If you don't have an encoder on the final spindle, then that points to not having the option.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Posting Permissions
| | |
