from access address DE000004. part faulty is SC card on UCMB.
hi,every one. my okuma controller cant work and give a SBER alarm. The red led is light. The following information is display on the screen . Could someone can give me adivce about it ? the"access address=DE000004", indicate which board? the "UCMB2+F" OR "FWMB2" OR "FCP4"? OR MEMERY CARD? thanks very much for your help!
THE SCREEM DISPLAY:
1-1 cpu-alarm bus error (system bus)
bus error status (SBER,SBPAR,CYO,O,PRT,DIA,LOP,ECC)=80
SSW=074D ACCESS ADDRESS=DE000004
D0=DE000000 D1=00200000 D2=00000000 D3=DE000000
D4=00200000 D5=00000001 D6=4D443041 D7=6FBFFFFF
A0=00FE1500 A1=0300EFB4 A2=00FDC800 A3=0000FF7C
A4=00FE1500 A5=9E84F68A A6=00001000 A7=0000FF74
US=73DC88F7 IS=0000FF74 MS=95ED6184 SR=00002708
PC=0300EF84
Similar Threads:
from access address DE000004. part faulty is SC card on UCMB.
Can anyone give me some advice?
thanks for your help, usamah.
but,there is no SC card on my UCMB2+F board. there are two cards on it, one is sram+flash card ,another is FDC card.
and what function is SC card perform? or,in other words ,SC , MEAN which two WORDS ?
sorry if my word not clear.I mean SC is sram card,on older UCMB there are 3 card:sram card,dram card and flash memory card..I think card faulty at your machine is sram+flash card,.but I forget there is need to reinstall software or not if we want to replace that part..sorry.
when i rewelded the flash devices on the SC card. the problem chang to the new status :
1-3 cpu alarm bus error (cyo error)
bus error status =20
SSW=074D ACCESS ADRESS=DD7EFFF2 ,
so, i dont know this problem is of a hardware or a software ,
usamah, are you on line?
did you know the where is the problem,the alarm information is "SSw=074D ACCESS ADDRESS=DE100000" ?
If I saw my table, access address DE000004 and DE100000 means Sram card on UCMB faulty.but for DD7EFFF2,it mean UCMB faulty..
thanks, you're a nice man ,really. i would purchase a new card .
i have similar this error in osp7000:
1-1 cpu-alarm bus error (system bus)
bus error status (SBER,SBPAR,CYO,O,PRT,DIA,LOP,ECC)=80
SSW=0145 ACCESS ADDRESS=DE000000
anybody can help me?
hi again
i saw your message . i have the same problem with my okuma ( ssw=045 access address=DE000000 . if u solve it please help me
Hello people!
Can anyone help me with my Okuma LT10-M, OSP U100-L control.
I have similar alarm.
1-3 CPU-ALARM BUS ERROR (CYCLE OVER)
BUS ERROR STATUS (SBER, SBPAR, CYO, 0, PRT, DIA, LOP, ECC)=20
SSW=072D ACCESS ADDRESS=FC000000
D0=00000700 D1=000000000 D2=00000000 D3=FC000000
etc.
I supose I have problem with some of the cards, but don't know which one...
I hope for your quick response.
Best regards,
Samir
Hi,
Did you ever find out what caused this? We have similar problem with OSP700M control.
hi
SVP 2 BOARD BROKEN