Coolant on Multus

[ChattaMan]

On our recently purchased Multus, M8 with an M tool turns on the external coolant. M8 with an L tool turns on the through spindle coolant. I'm running an internal grooving tool and would like to flush it with the external coolant aswell as the through coolant. Is this possible and if so which M code turns it on.
I can achieve this with the coolant buttons on the operator panel but would prefer to control it in the program.

[OKUMA Tech]

Look in parameters and look under coolant should be a check box to let you turn it on with the standard coolant ?????

[RWACKO]

thru spindle coolant lathe tool m08 m09 mill tool m174 m175
flood coolant (turret nozzles )lathe tool m262 m263 mill tool m08 m09
v groove coolant lathe tool m263 m262 mill tool m08 m09
v groove air blow all tools m869 m868 (with m spindle rotation)
thru spindle air blow all tools m51 m50
also m175 m174 for thru coolant mill tool i believe

[ChattaMan]

OK, thanks OKUMA Tech. I tried checking the parameters and programming M145 and M175 but was no different

I'll try RWACKO's codes tomorrow if I get chance.

What is "v groove" coolant?

Thanks