Multus B300

[MCR-B II]

Multus B300 milling spindle CCW direction parameter. Normally in cycles CW direction. But we want CCW direction.

[budgieW]

Does M13 spin the tool the wrong way?

[MCR-B II]

Thanks for your reply

Ex :
TL=001001 SB=424 M14 M241
X::
C0
G183 X100 Z125 C0 K0 F2420 E0.28 D3 L30 (When executing this milling sp rotates in M13. We want M14 direction)


thanks

[budgieW]

Interesting, Do you have a Left hand Drill? The parameters settings for Drill will be global as spindle ON and C axis clamp are part of the drill cycle.

[MCR-B II]

Left hand drill or left hand tap. In cycles sp rotates M13 direction

[Algirdas]

so use M13 instead of M14 in cycles, what's the problem?
on OSP P-200L there is a parameter for tool, which inverts spindle revolution because of tool design.