Need Help! OKK G4 tool change door open - CNCzone.com-The Largest Machinist Community on the net!

dannystooblue · #1 09-11-2009, 03:21 PM

I just wired up an OKK G4 Graphite mill with the tool changer in the back with a tilt out door. When I turned on the air to the machine it opened the tool change door. I do not have manuals to tell me how to close the door manually. Any help would be appreciated.

Danny

dannystooblue · #2 09-13-2009, 09:25 PM

I am sure there is a manual way to open and close the tool changer door because there is no external way to access it but I haven't figured it out yet. What I did to get it to close was to turn off the machine, turn it back on and cycle a tool change.

Danny

Mitsman · #3 09-18-2009, 09:26 AM

OKK electrical manual has the list of M-codes for the machine in it. Do not be fooled when you first open the book and think everything is in Japanese. They alternate chapters in the book. First Japanese then English. We do not have a G4 electrical manual here but in the DGM400 manual M100 opens the ATC door and M102 closes the door. Most of OKK machines will follow the same set of M-codes.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
orient tool for tool change Hall effect?	Luslugger	CNC Machining Centers	0	04-24-2009 07:24 PM
kira vtc30a door won't open	nevron	General Metal Working Machines	0	11-28-2008 09:30 AM
Very slow tool change on Tool Room Mill	Capt Crunch	Haas Mills	3	12-21-2007 01:20 PM
How to change Tool change position(About MAZATROL T1 control)	liushuixingyun	Mazak, Mitsubishi, Mazatrol	5	07-07-2007 03:58 PM
Mini Mill door open alarm	paptep	Haas Mills	9	11-21-2005 04:31 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)