| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| OKK Discuss OKK Machines here |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-13-2009, 08:53 AM
| |||
| |||
I am working on setting up my new to me OKK TRC500 with the fanuc 16m control. The post I have defaults an M50 out with the G5P10000. I know the makino's use M250, M251, M252, and M253 to set the machine for different highspeed modes, the OKK is new to me and the manuals have not jumped out at me with the answer to this question. What exactly does the M50 set the machine to and are there any other M codes for highspeed on the OKK? Danny    |
|
#2
07-06-2009, 09:06 AM
| |||
| |||
OKK does not provide M-codes for different high speed modes. M50 is usually the air blow. This is the external air coolant for blowing chips out of the cutting path. The G5P10000 should be on a separate line and it should be after the M50 command. |
|
#3
07-08-2009, 12:28 PM
| |||
| |||
We have a OKK PG8 5axis and the code is G5P1 turns it on and G5P0 turns the high speed machining off. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- tree 1050 highspeed tool change problems | productservice | Tree | 3 | 04-02-2008 04:54 PM |
| Highspeed Spindle | mkuivamaki | General Metal Working Machines | 0 | 02-01-2008 10:36 AM |
| M-codes and G-codes 4 Matsuura ES-1000V | maximusek | G-Code Programing | 2 | 11-27-2007 07:41 AM |
| Highspeed at Booth B-6038 IMTS | HighSpeed | Trade Shows and Events | 1 | 09-03-2004 04:30 PM |
| Highspeed servo drivers | CNCadmin | Servo Drives | 5 | 07-07-2003 01:02 AM |
| | |
Linear Mode
