Need Help! emg ls problem MCV 460

Results 1 to 5 of 5

Thread: emg ls problem MCV 460

  1. #1
    Registered
    Join Date
    May 2008
    Location
    US
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default emg ls problem MCV 460

    I Have a okk mcv 460,like the 500. i had the machine running the other day,was fine. Shut it down for some maintence, when started back up got the ready light, then after a few seconds got alarm 1008 oil cooling (head) & 1071 emg LS on. it is stuck in a state emg stop. Cooler seems ok, emg stop button is working. the local guy isn't real familair with the 5000c2 controls. Any help is appreciated.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2008
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default

    You should have a EMG> release switch. Hold this up, & hit reset. Then in handle, move all axis off home pos. at least a 1\2 inch. If that wount work, check for a stuck limit switch. The screen may tell you what axis it is.



  3. #3
    Registered
    Join Date
    May 2008
    Location
    US
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default

    Thanks for the info, i had tried that. i got a hold of mitsubishi and found out it was a board in the control.



  4. #4
    Registered
    Join Date
    Mar 2004
    Location
    United States
    Posts
    47
    Downloads
    0
    Uploads
    0

    Default okk manuals

    I have a mch 450 and a pcv40. I have manuals for both. I am looking for a "parts" machine. What board do you need?
    Bob

    Robert Setree 502-452-9851


  5. #5
    Member sting007's Avatar
    Join Date
    Feb 2015
    Location
    44635
    Posts
    96
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Luslugger View Post
    I have a mch 450 and a pcv40. I have manuals for both. I am looking for a "parts" machine. What board do you need?
    Bob
    Hi,
    I need the parameter for pcv 40 with fanuc 18MB,
    Do you have it?
    Regards,
    Sting



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

emg ls problem MCV 460

emg ls problem MCV 460