Need 4th Axis For MCV500

[OKK MVC500user]

Hi group. I am looking for a 4th axis for our OKK MCV 500 mill with the Meldas CII
control. Located in SW Ontario, Canada.

Tim

[DPL86]

Hello Tim,

i buy an okk mcv-300 with a rotary table (A-AXIS).
I dont need this axis.
this rotary table is a tsudakoma rnmc-300
turntable dia is 320mm
for more info,e-mail me!
regards
den
dpl86@hotmail.com
i live near montreal.