Can someone check their 135, and see how their Z ballscrew is oiled?
I went in the back of the machine for the first time in a while, and the Z ballscrew was fairly dry. I also found an oil line had fallen off one of the two Z dovetails - but for the life of me, I couldn't find an oil line for the Z ballscrew. Anyone know how it receives lube??
Thanks Rayoung! my attached pic shows the Z ballscrew. If I am interpreting your picture correctly, it seems I am missing the oiler manifold which you have. Please correct me if I am wrong.
My mill was delivered Apr09.
I got mine about a year later and noticed in the pic that your Z axis limit switch tabs are different. They have one like that at their shop that I was looking at which has the covers off but I didn't notice what it had for oiling the Z ballscrew. That was a while back. Mine does have an oil manifold on the moving part of the Z axis.