more trinkits from the nm145

[ihavenofish]

Not sure what you consider cheap or expensive, but you can get 0.020" diameter square end mills here for under $20:

$20 would be very expensive. they are $13ish at maritool. kbc has them for $20 locally.

[ihavenofish]

[ihavenofish]

[marcel beaudry]

Very nice

Good Job

Marcel

[kvom]

You've exceeded the limits for "trinkets"! Beautiful.

[ihavenofish]

You've exceeded the limits for "trinkets"! Beautiful.

haha, yeah, oops.
ill get to play with the 4th axis soon though...

[SpeedsCustom]

That is sick.

-Jason