I recently got my Novakon 6" rotary table setup running (kinda) from on my 145 but when i run a g code that is suppose to go 360 around the part it stops early. even though the readout says it went 360. I am using the stock numbers for motor tuning from Novakon. would anybody that has a 6" table working correctly be willing to share their motor tuning settings with me. Im sure its something simple but im new at this and i dont want to be randomly guessing at numbers.
found the problem. by default the steps per setting is set to 400 but for the 6" table it should be set to 500 now everything is working nice and smooth.