MESA board recommendation for Pulsar and PathPilot

Results 1 to 6 of 6

Thread: MESA board recommendation for Pulsar and PathPilot

  1. #1
    Member
    Join Date
    Jan 2016
    Posts
    120
    Downloads
    0
    Uploads
    0

    Default MESA board recommendation for Pulsar and PathPilot

    Hi guys,

    I called Tormach today and ordered the PathPilot DVD. It was 100 bucks, and they have a part number for non Tormach users - 36035 I believe.

    I have a few questions, and I'll probably have a couple more during the switchover. Primarily, I'm curious as to what MESA board is recommended. I have the 4 axis stepper Pulsar and would like to keep some flexibility for future additions (additional axes, tool changer, or changing to servos). Also, I'm using BobCAM for SolidWorks and will need to know what post processor to use.

    Anything else to know while switching controllers?

    Thanks for your help!

    Micah

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2016
    Posts
    386
    Downloads
    0
    Uploads
    0

    Default Re: MESA board recommendation for Pulsar and PathPilot

    I followed Brian's instructions on installing PathPilot on my Pulsar. I installed PP on a new SSD using an old motherboard I already had. The MESA card you need depends on the motherboard in your control panel. I used an empty PCI slot in the old mother board with the 5i25 MESA Card. I think if you use a newer MB you may need the 7i25 MESA card. The complete changeover took an hour or two.

    See this thread for Brian's instructions.

    Steve



  3. #3
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    701
    Downloads
    0
    Uploads
    0

    Default Re: MESA board recommendation for Pulsar and PathPilot

    Ditto. But it's either 5i25 or 6i25 depending on pci vs pci-express slots respectively



  4. #4
    Member
    Join Date
    Jan 2016
    Posts
    120
    Downloads
    0
    Uploads
    0

    Default

    Thanks guys. What post do you run from your CAM software?



  5. #5
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    701
    Downloads
    0
    Uploads
    0

    Default Re: MESA board recommendation for Pulsar and PathPilot

    I use the Tormach PathPilot Mill post from Fusion. Its the built in one.



  6. #6
    Member
    Join Date
    Jan 2016
    Posts
    120
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by brianbonedoc View Post
    I use the Tormach PathPilot Mill post from Fusion. Its the built in one.
    Great! I really appreciate your help!

    Micah



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MESA board recommendation for Pulsar and PathPilot

MESA board recommendation for Pulsar and PathPilot