Calling out to all Norwegians


Page 1 of 8 1234 ... LastLast
Results 1 to 20 of 141

Thread: Calling out to all Norwegians

  1. #1
    Registered
    Join Date
    Mar 2008
    Location
    Norway
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default Calling out to all Norwegians

    Hello!
    I just wanted to check if there was anybody from Norway here.
    We could cooperate in builds and finding resources close to home.

    Regrads

    Otto Ødegård
    Sandnes

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2008
    Location
    Norway
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    You are not alone, Greetings from Lillehammer



  3. #3
    Registered
    Join Date
    Feb 2008
    Location
    Norway
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    ....and from Frosta, Nord Trøndelag.
    Knut A



  4. #4
    Registered
    Join Date
    Mar 2006
    Location
    Norway
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default

    ...and from Moss, Østfold.



  5. #5
    Registered
    Join Date
    May 2004
    Location
    Denmark
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default

    If you search the member list there is 135 members from norway.

    Regards
    Bent



  6. #6
    Registered
    Join Date
    Oct 2007
    Location
    Norway
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Yes, greetings from Stavanger



  7. #7
    Registered
    Join Date
    Jul 2006
    Location
    Norway
    Posts
    87
    Downloads
    0
    Uploads
    0

    Default

    Oslo aqui!



  8. #8
    Registered
    Join Date
    Jun 2005
    Location
    norway
    Posts
    55
    Downloads
    0
    Uploads
    0

    Default

    Greets from Bartebyen aka Trondheim



  9. #9
    Registered
    Join Date
    Mar 2008
    Location
    Norway
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default

    Have any of you buildt a CNC machine? Im building a joes 4x4(2x2)hybrid.
    Do you have a pro cnc machine?
    And what do you use the machine for?

    Otto Ø
    Sandnes



  10. #10
    Registered
    Join Date
    Jun 2005
    Location
    norway
    Posts
    55
    Downloads
    0
    Uploads
    0

    Default

    In progress...
    Have built an hobbycnc 4-axis controller and the motors are spinning.
    Waiting for Widgitmaster to complete the batch of minis
    I'll use the machine for PCB routing++

    Henrik
    Trondheim

    EDIT: Usage..



  11. #11
    Registered
    Join Date
    Jan 2005
    Location
    Norway
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    ....og i fra Moelv



  12. #12
    Registered
    Join Date
    Mar 2008
    Location
    Norway
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by henrikw View Post
    In progress...
    Have built an hobbycnc 4-axis controller and the motors are spinning.
    Waiting for Widgitmaster to complete the batch of minis
    I'll use the machine for PCB routing++

    Henrik
    Trondheim

    EDIT: Usage..
    What kit did you buy? Was it hard to make?




  13. #13
    Registered
    Join Date
    Jun 2005
    Location
    norway
    Posts
    55
    Downloads
    0
    Uploads
    0

    Default

    I bought the HobbyCNC pro 4-axis with 205oz/in steppers.

    It was not difficult to make the board, but the installation in the PacTec enclosure was a bit harder, also I used a 24V/8A switching PSU rather than buying a trafo and using the diode bridge that was supplied with the kit.

    Henrik

    Last edited by henrikw; 08-19-2008 at 04:09 AM.


  14. #14
    Registered
    Join Date
    Jun 2005
    Location
    norway
    Posts
    55
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Odeott View Post
    What kit did you buy? Was it hard to make?
    The widgitmaster mini was easy to assemble, took 20 minutes or so.
    The workingtable from Jula is another story however. I know I can't expect much for NOK299,- but this is really a POS..

    H.



  15. #15
    Registered
    Join Date
    Jun 2006
    Location
    Norway
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    ...and from Fredrikstad



  16. #16
    Registered
    Join Date
    Sep 2008
    Location
    Norway
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    Larvik here



  17. #17
    Registered
    Join Date
    Sep 2008
    Location
    Norway
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    btw are ther any norwegian CNC Boards ??? i did have a look at one where they did discuss CNC routers but their main business was RC pliains ...

    if no such forum exsist maybe we coul set one up ??? i have some ideas and i got the skill to set it up and do all the maintenace work ..



  18. #18
    Registered
    Join Date
    Feb 2008
    Location
    Norway
    Posts
    61
    Downloads
    0
    Uploads
    0

    Default

    ...and from Tromsø..



  19. #19
    Registered
    Join Date
    Feb 2008
    Location
    Norway
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    Hei alle nordmenn! Er det greit å skrive på norsk i denne tråder? Jeg har bygget en CNC fres som jeg nå driver å tester ut. Bruker Mach3 og strever med å få kontroll på offset-settingene.
    Dette er som å sitte på skolebenken igjen, men opplæringskurven er nok blitt litt flatere med årene...he, he.
    Se gjerne på noen videosnutter jeg har lagt ut på YouTube: http://www.youtube.com/lnyje

    Kommer nok tilbake med masse spørsmål etterhvert.
    Knut A



  20. #20
    Registered
    Join Date
    Mar 2008
    Location
    Norway
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default

    Flott! Hvilken maskin har du bygget?



Page 1 of 8 1234 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Calling out to all Norwegians

Calling out to all Norwegians