2. Auto focus
Instead of the focal length ruler.
The laser will have a fixed focal length.
--------
Melody
Sales Manager of G.Weike
E-mail: melody@vip.163.com li@wklaser.com
Skype: melody.gweike
1. Red Dot
Gives position of the laser. So you can check very easily what's your work going on.
--------
Melody
Sales Manager of G.Weike
E-mail: melody@vip.163.com li@wklaser.com
Skype: melody.gweike
Similar Threads:
2. Auto focus
Instead of the focal length ruler.
The laser will have a fixed focal length.
--------
Melody
Sales Manager of G.Weike
E-mail: melody@vip.163.com li@wklaser.com
Skype: melody.gweike
Auto focus working video
"http://http://www.youtube.com/watch?v=7xwz-ADo-lo"]http://http://www.youtube.com/watch?v=7xwz-ADo-lo
3. up-and-down platform
Without it, you can only work on material within 5cm height.
If this equipped on a machine, the up-and-down distance of the platform can be 40cm.
It is very helpful for some thick material work.
Also it is the basic accessory for auto focus, rotary.
--------
Melody
Sales Manager of G.Weike
E-mail: melody@vip.163.com li@wklaser.com
Skype: melody.gweike
up-and-down platform video
"http://www.youtube.com/watch?v=b0PQnEgBjhY&context=C4b720e7ADvjVQa1PpcFNFnMEHVYHHoS-IdzXPpFRZdJ0Ljy3l-Go="]http://www.youtube.com/watch?v=b0PQnEgBjhY&context=C4b720e7ADvjVQa1PpcFNFnMEHVYHHoS-IdzXPpFRZdJ0Ljy3l-Go=
--------
Melody
Sales Manager of G.Weike
E-mail: melody@vip.163.com li@wklaser.com
Skype: melody.gweike
Last edited by Melody-gweike; 04-08-2012 at 02:38 AM.
4. Rotary
For cylinder working.
There are two styles of rotaries.
1. New style with clips suitable for bottles & mugs which have bottom
--------
Melody
Sales Manager of G.Weike
E-mail: melody@vip.163.com li@wklaser.com
Skype: melody.gweike
another photo of new style rotary
New style Rotary Laser Engraving video
http://www.youtube.com/watch?v=ghsST_A83Ck]gweike laser engraving machine engraver rotary engraving - YouTube
--------
Melody
Sales Manager of G.Weike
E-mail: melody@vip.163.com li@wklaser.com
Skype: melody.gweike
2. We call it old style rotary. But it has its advantages.
It is used for cylinders which have not bottoms as tubes. and also Ok for bottles.
--------
Melody
Sales Manager of G.Weike
E-mail: melody@vip.163.com li@wklaser.com
Skype: melody.gweike
5. Water chiller
This one is suggested very much
3000W for small machines smaller than 900mmX600mm
5000W for larger machines
Water chiller takes place of a water pump. It can not only make your machine more beautiful but also can protect & cool the water in the tube so that make the tube's life longer.
--------
Melody
Sales Manager of G.Weike
E-mail: melody@vip.163.com li@wklaser.com
Skype: melody.gweike