We are using Bosch Make Spindle Drives like SPM 75-TD, Servo Modules like SM 17/35-TA and Power Supply Modules like VM100 R-TA in our Spiromat S35 Oerlikon (Germany) Make Gear Cutting Machines
Please let us know if any of you are using such Bosch Drives so that we can discuss problems related with them
Hi Mr.Rishikesh,
We have a Hüller hille nb-h90 horizontal machining center with Bosch CC320M
control and SM10/20 TC, SM15/30 TC and SM25/50 TC servo drives.
I have problem with SM15/30 servo drive or motor. The motor is oscilating. I replaced the encoder but nothing changed. Now I am planning to replace it.
I have some documentation if you need I can send you.