20x36 Frame 1/2 Aluminum
20" end frame
15" Y uprights
2 36'" Aluminum profile
1 20" Aluminum profile
4 16mm bearings and housing
4 20mm bearings amd housing
2 36" X 20mm Linear rails
2 20" Y 16mm Linear rails
6 mm bolts
$ 450
30x48 Frame 1/2 Aluminum
30" end frame
17" Y uprights
2 48'" Aluminum profile
1 30" Aluminum profile
8 20mm bearings and housing
2 48" X 20mm Linear rails
2 30" Y 20mm Linear rails
6 mm bolts
$550
Bro they look amazing and well done on supplying the consumer with an affordable package well done! Ok so what will each machine's cutting capacity be ? bro would you ship to the UK? can't wait to get more info on these, you are onto a winner for sure and I think you have a customer right here, let us know ASAP Cheers!
Thanks Gio for the lightning quick answerCHEERS! Ok so if I was to order the 20 X 36 frame what will the cutting capacity be and also what will be included in the kit? I see that there is no z axis on the machine is this available separately or does it come with the kit ? Basically all I want is the main machine frame with z axis and I can supply my own leadscrews and electronics is this doable and also how much ? Feel free to PM me or post here its up to you bro but I am very,very interested.
Damn just a tad too small, the length ie X is good but I need to cut width wise 16 inches, looks like the bigger machine will be what I will need. Ok so how much will the larger machine plus the Z axis be ? with the leadscrews and without ? Oh boy I am getting excited now also what is the wait time from payment to machine kit being sent ?
Sorry for all the questions and answers but have to ask before I can commit hope you understand.
What is cost of complete kit? What is included(i.e. Mechanical or electrical instructions? Support? Software?)
It looks great, you have got my interest.
Good Luck!
Streamside
20x36 Frame 1/2 Aluminum
20" end frame
15" Y uprights
2 36'" Aluminum profile
1 20" Aluminum profile
4 16mm bearings and ballnut housing
4 20mm bearings and housing
2 36" X 20mm Linear rails
2 20" Y 16mm Linear rails
X 36" 2005 ballscrew with nut
Y 20" 1605 ballscrew with nut
20mm Ballnut Bracket
2 couplings with nut
2 Nema 23 Motor mount
4 single Bearing house with 6200 w/ double sealed bearing
6 mm bolts complete frame $870
3 270 oz motors ,3 4.2a drivers, breakout board with cable $260 with full frame only ,same with 425 oz motors $280
ONLY need 6mm hex wrench to assemble
one year warranty on all parts including bearings ,ballscrews
30x48 Frame 1/2 Aluminum
30" end frame
17" Y uprights
2 48'" Aluminum profile
1 30" Aluminum profile
4 X 20mm bearings and housing
4 Y 20mm bearing with ballnut housing
2 48" X 20mm Linear rails
2 30" Y 20mm Linear rails
X 1200mm 2005 ballscrew with nut
Y 750mm 1605 ballscrew with nut
4 single Bearing house with 6200 w/ double sealed bearing
2 Nema 23 Motor mount
20mm Ballnut Bracket
2 couplings with nut
6 mm bolts Complete $999
3 270 oz motors ,3 4.2a drivers, breakout board with cable $260 with full frame only ,same with 425 oz motors $280
ONLY need 6mm hex wrench to assemble
one year warranty on all parts including bearings ,ballscrews
40x60 Frame 1/2 Aluminum
2 40" end frame
17 1/2 " Y uprights
2 60'" Aluminum profile
1 40" Aluminum profile
4 X 25mm bearings and housing
4 Y 20mm bearing with ballnut housing
2 60" X 25mm Linear rails
2 40" Y 20mm Linear rails
X 60" 2005 ballscrew with nut
Y 40" 1605 ballscrew with nut
4 single Bearing house with 6200 w/ double sealed bearing
2 Nema 23 Motor mount
20mm Ballnut Bracket
2 couplings with nut
6 mm bolts Complete $1,150
40x72 $1.250
3 270 oz motors ,3 4.2a drivers, breakout board with cable $260 with full frame only ,same with 425 oz motors $280
ONLY need 6mm hex wrench to assemble
one year warranty on all parts including bearings ,ballscrews