Results 1 to 4 of 4

Thread: DIY Gantry Kits for CNC Plasma Tables

  1. #1
    Registered
    Join Date
    Dec 2007
    Location
    usa
    Posts
    86
    Downloads
    0
    Uploads
    0

    Default DIY Gantry Kits for CNC Plasma Tables

    Precision Plasma LLC is proud to announce the release of a new line of CNC Plasma Table Gantries for DIY table builders.



    Specifications:
    • Aluminum rails with hardened v-guides
    • Size 2 v-guide wheels
    • Z axis with 5" of travel
    • Built in floating torch switch for "touch and go" plasma cutting
    • Spring loaded gear to gear rack to eliminate backlash
    • Direct drive nema 23 motor mounts
    • Optional 2:1 belt reduction units

    Price List:
    • 4 x 4 gantry kit $2000
    • 5 x 5 gantry kit $2200
    • 4 x 8 gantry kit $2500
    • 5 x 10 gantry kit $2800

    Motors are shown for reference and are not included.

    Visit Precision Plasma LLC for more information
    http://www.precisionplasmallc.com/default.htm

    Best Regards,
    Ron Chacich

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2010
    Location
    US
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Gantry kit

    I was trying to buy the 4x8 gantry kit. Where can I buy it? I saw it on ebay but price is expensive. Where do you have this 2500.00 price?



  3. #3
    Registered
    Join Date
    Dec 2007
    Location
    usa
    Posts
    86
    Downloads
    0
    Uploads
    0

    Default

    Unfortunately, we have had significant price increases from 2 of our main vendors since the gantry kit prices were posted in February. We can no longer sell a 4 x 8 gantry kit for $2500. The new cost is $3000 if purchased direct. Please contact info@precisionplasmallc for more information.
    Best Regards,
    Ron Chacich



  4. #4
    Registered
    Join Date
    Dec 2007
    Location
    usa
    Posts
    86
    Downloads
    0
    Uploads
    0

    Default Current Gantry Kit Pricing

    Here are the current gantry kit sizes and pricing offered by Precision Plasma LLC.

    • 2X2 $1,900
    • 2X3 $2,000
    • 3X4 $2,200
    • 4X4 $2,500
    • 5X5 $2,800
    • 4X8 $3,000
    • 5X10 $3,500


    Please contact info@precisionplasmallc.com for more information.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed