Milltronics VK4 3 axis CNC - No Longer Available

Results 1 to 2 of 2

Thread: Milltronics VK4 3 axis CNC - No Longer Available

  1. #1
    Member
    Join Date
    Mar 2014
    Location
    USA Baby!
    Posts
    55
    Downloads
    0
    Uploads
    0

    Default Milltronics VK4 3 axis CNC - No Longer Available

    Milltronics VK4 3 axis CNC

    Really nice 3 axis VK4 also known as a VKM4. 30"x, 15"y 5.75 Z in CNC mode. 12 x 54 table. An additional 6" Z if using the quill handle. The table also moves up/ down 15" like a bridgeport. 7 HP 3 phase that will run perfectly on single phase (how I use it). Derates it to 5 HP. Easy to program in conversational for bolt patterns, pockets, profiles ect. You can also bring files over to it with a USB and use programs developed by mastercad, bobcad ect. Uses CAT 40 tooling. None included. Uses Centurian 6 control that has just been factory updated with the newest motherboard and software. All axis are tight and use 1.25 ball screws and are driven by DC servos. Machine is used daily and works perfectly. A droplet mister is used and the machine can use liquid coolant.
    Machine weight is approx 4000pds. Can load on your truck / trailer. It can be shipped, would need to make a large strong pallet. At extra cost. Machine is still in use daily, I can provide some training. It is also still offered by Milltronics.
    Pictures coming Phone 319 310 6920 NO TEXTs
    email tom@12bolt.com

    List Date: 4/21/2017

    For more info, click here to view the original listing: Milltronics VK4 3 axis CNC
    --------------------------------------
    This item is no longer available.


    --------------------------------------





    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2014
    Location
    USA Baby!
    Posts
    55
    Downloads
    0
    Uploads
    0

    Default Re: Milltronics VK4 3 axis CNC

    Really nice 3 axis VK4 also known as a VKM4. 30"x, 15"y 5.75 Z in CNC mode. 12 x 54 table. An additional 6" Z if using the quill handle. The table also moves up/ down 15" like a bridgeport. 7 HP 3 phase that will run perfectly on single phase (how I use it). Derates it to 5 HP. Easy to program in conversational for bolt patterns, pockets, profiles ect. You can also bring files over to it with a USB and use programs developed by mastercad, bobcad ect. Uses CAT 40 tooling. None included. Uses Centurian 6 control that has just been factory updated with the newest motherboard and software. All axis are tight and use 1.25 ball screws and are driven by DC servos. Machine is used daily and works perfectly. A droplet mister is used and the machine can use liquid coolant.
    Machine weight is approx 4000pds. Can load on your truck / trailer. It can be shipped, would need to make a large strong pallet. At extra cost. Machine is still in use daily, I can provide some training. It is also still offered by Milltronics.
    Pictures coming Phone 319 310 6920 NO TEXTs email tom@12bolt.com

    Last edited by tlowe; 04-22-2017 at 08:56 AM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Milltronics VK4 3 axis CNC - No Longer Available

Milltronics VK4 3 axis CNC - No Longer Available