- Milltronics VK4 3 axis CNC - No Longer Available
-
Member
-
-
Member
Re: Milltronics VK4 3 axis CNC
Really nice 3 axis VK4 also known as a VKM4. 30"x, 15"y 5.75 Z in CNC mode. 12 x 54 table. An additional 6" Z if using the quill handle. The table also moves up/ down 15" like a bridgeport. 7 HP 3 phase that will run perfectly on single phase (how I use it). Derates it to 5 HP. Easy to program in conversational for bolt patterns, pockets, profiles ect. You can also bring files over to it with a USB and use programs developed by mastercad, bobcad ect. Uses CAT 40 tooling. None included. Uses Centurian 6 control that has just been factory updated with the newest motherboard and software. All axis are tight and use 1.25 ball screws and are driven by DC servos. Machine is used daily and works perfectly. A droplet mister is used and the machine can use liquid coolant.
Machine weight is approx 4000pds. Can load on your truck / trailer. It can be shipped, would need to make a large strong pallet. At extra cost. Machine is still in use daily, I can provide some training. It is also still offered by Milltronics.
Pictures coming Phone 319 310 6920 NO TEXTs email tom@12bolt.com
Last edited by tlowe; 04-22-2017 at 08:56 AM.
- Milltronics VK4 3 axis CNC - No Longer Available
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules