- PM-940M-CNC-VS w/4th Axis - No Longer Available
-
Member
PM-940M-CNC-VS w/4th Axis - No Longer Available
PM-940M-CNC-VS w/4th Axis
Purchased 3/18/2016:
Table: 9.5 x 39.375; 3 slots
Axis Travel (full way support-stop to stop): X 21"-26.5"; Y 10.75"-13"; Z 17"-20"
Spindle to table distance: 1.5-21.5
Max distance Spindle to column: 11" to Z way cover, 12.25 to Z axis way surface
Quill Travel: 5"
Leadscrew: High precision Ground ballscrews class P4, anti backlash; Pitch: .200 (5TPI)
Spindle Taper: R8
Spindle Speed: Low 90-1920; High 90-3200 (VFD controlled)
Spindle Bearings: Precision Tapered Roller Bearings Class 5
Spindle Motor HP: 2
Input Voltage: 220V, Single Phase
Control: Mach3 (license not included)
Breakout Board: ESS Smoothstepper
Stepper Motors: NEMA 34, 6A/Phase, 200 steps/rev, 640 oz-in on X and Y, 1200 oz-in on Z
Induction hardened ways
Limit and Home switches on all axes.
100IPM feed on X & Y, 75 on Z
Software controlled spindle speed via CNC4PC C6 control board
Automatic Oiler
R8 Collet Set
4th Axis with 6" rotary table, chuck, and tailstock
Mach3 Controlled Mister or Air Blast
Includes laptop control computer!
$7500 obo
List Date: 12/7/2016
For more info, click here to view the original listing: PM-940M-CNC-VS w/4th Axis
--------------------------------------
This item is no longer available.
--------------------------------------
Similar Threads:
-
- PM-940M-CNC-VS w/4th Axis - No Longer Available
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules