Hurco Hawk 30 Tool Room Mill

Perfect CNC for a farm or garage shop. Big travels, small foot print, and easy to load bulky parts. I bought this machine from Brigham Young University about 5 years ago and have recently bought a machine with a 4th axis. It was used in their engineering shop (not the student shop) and has seen very little use and is exceptionally tight. I've used it for various farm project and have a few products I make. I've probably put 100hrs a year or less on it since I bought it. It's got the Ultimax 3 control with dual LCD touch screens and very easy to use conversational program. Comes with all manuals. I'll try and get some additional pictures with it cleaned up.

3-Axis

CAT 40 Spindle

Table Size: 52' x 11"

Spindle Speeds: to 3,800 RPM

Y-Axis Travel: 18"

Z-Axis Travel: 20"

X-Axis Travel: 35"

Maximum Table Weight: 770 Lbs.

Distance, Spindle Nose to Table Top: 2.4" Min. 22.4" Max.

Distance, Face of Column to Spindle Center: 18"

Quill Diameter: 3.94"

Quill Travel: 5"

Feed Rates:

X & Y Axis--400 IPM Max,

Z Axis- 250 IPM Max.

List Date: 6/16/2016

For more info, click here to view the original listing: Hurco Hawk 30 Tool Room Mill
--------------------------------------
This item is no longer available.


--------------------------------------







Similar Threads: