NcPlot 2.22

[camtd]

I just downloaded Version 2.22 the new toollist function in a real nice new feature. I will be using it all the time.

Thank You
Scott


It would be real helpful to have the feature
"File ,Show Tools in the file"
just like we have
"File, Show Programs in the file".

Also to be able to plot G66 with the M98 like below would be real helpful for the parts I program.
%
O6270(1962M99P01-OP70)
(SUBPROGRAMS-6271-THRU-6294)
(DATE-3-MAR-2011)
N0010 G0G17G28G49G80G91G94G97Z0
N0020 M303
N0030 G91G40G28X0Y0
N0040 M69
N0050 G28B0
N0060 M68
N0070 G0G90G57C0.(WORK-OFFSET)
N0080 M01

(ROUGH-AREA-K-.010-STK)
(ENDMILL-.250-DIA-.50-F.L.-1.00-O.L.)
N0370 T23
N0390 M69
N0400 G0G90G58B90.(WORK-OFFSET)
N0410 C56.575
N0420 M68
N0430 X-.849Y-.3607S2292M3
N0440 G43H23Z6.M08
N0450 G66 P6272(ROUGH AREA-K-.010-STK)
N0460 M98 P6273
N0470 G67
N0480 G0G91G28G49Z0.M9
N0490 G0G40X0.Y0.M5
N0500 M01


O6272(ROUGH-AREA-K-.010-STK)
N0010 Z4.44
N0020 G1Z3.75F2.5
N0030 X-.824
N0040 Y.3607
N0050 X-.874
N0060 Y-.3607
N0070 X-.849
N0080 Z4.44F20.0
N0090 G0Z4.54
N0100 X-1.449
N0110 Z4.44
N0120 G1Z3.75F2.5
N0130 X-1.424
N0140 Y.3607
N0150 X-1.474
N0160 Y-.3607
N0170 X-1.449
N0180 Z4.44F20.
N0190 G0Z4.54
N0200 X-.849
N0210 M99
%

O6273(ROUGH-AREA-K-.010-STK)
N0010 C56.575
N0020 C146.575
N0030 C236.575
N0040 C326.575
N0050 M99

Similar Threads:

• NCPlot v2.31 is now available
• NCPlot v2.30 is now available
• NCPlot v1.2 now available
• NCPlot v2.01 now available
• Need Help NCPlot V1.1

[TURNER]

I just downloaded Version 2.22 the new toollist function in a real nice new feature. I will be using it all the time.

Thank You
Scott


It would be real helpful to have the feature
"File ,Show Tools in the file"
just like we have
"File, Show Programs in the file".

Also to be able to plot G66 with the M98 like below would be real helpful for the parts I program.
%
O6270(1962M99P01-OP70)
(SUBPROGRAMS-6271-THRU-6294)
(DATE-3-MAR-2011)
N0010 G0G17G28G49G80G91G94G97Z0
N0020 M303
N0030 G91G40G28X0Y0
N0040 M69
N0050 G28B0
N0060 M68
N0070 G0G90G57C0.(WORK-OFFSET)
N0080 M01

(ROUGH-AREA-K-.010-STK)
(ENDMILL-.250-DIA-.50-F.L.-1.00-O.L.)
N0370 T23
N0390 M69
N0400 G0G90G58B90.(WORK-OFFSET)
N0410 C56.575
N0420 M68
N0430 X-.849Y-.3607S2292M3
N0440 G43H23Z6.M08
N0450 G66 P6272(ROUGH AREA-K-.010-STK)
N0460 M98 P6273
N0470 G67
N0480 G0G91G28G49Z0.M9
N0490 G0G40X0.Y0.M5
N0500 M01


O6272(ROUGH-AREA-K-.010-STK)
N0010 Z4.44
N0020 G1Z3.75F2.5
N0030 X-.824
N0040 Y.3607
N0050 X-.874
N0060 Y-.3607
N0070 X-.849
N0080 Z4.44F20.0
N0090 G0Z4.54
N0100 X-1.449
N0110 Z4.44
N0120 G1Z3.75F2.5
N0130 X-1.424
N0140 Y.3607
N0150 X-1.474
N0160 Y-.3607
N0170 X-1.449
N0180 Z4.44F20.
N0190 G0Z4.54
N0200 X-.849
N0210 M99
%

O6273(ROUGH-AREA-K-.010-STK)
N0010 C56.575
N0020 C146.575
N0030 C236.575
N0040 C326.575
N0050 M99

Have you run this on a machine?
N0450 G66 P6272(ROUGH AREA-K-.010-STK)
N0460 M98 P6273
N0470 G67
I wasnt aware you could call M98 from within G66??
Keith.

[camtd]

Yes, the G66 with M98 with this program "which is a small part of the whole program" and all the programs they create here for milling where I work.


G66 P# (Your cutting moves)
M98 P# (All your position moves)
G67 (Have to use to cancel G66)

Program bounces between cutting and positioning

All the controls they have are from 6MB to 31i the G66 with M98 works with all our B style Fanuc controls.