CNC Guitar Building Instructional Videos

[sagreen]

Just wanted to drop a line on this forum and let you know that I am in the process of creating an instructional video series dedicated to modeling and building a guitar using Aspire (Vectric software) and a CNC machine. There will be a total of 5 videos in the set, Volumes 1-2 cover body modeling and machining, 3-4 will cover neck modeling and machining, Volume 5 will cover finishing and assembly. The goal is to take a stack of wood and parts, and show you everything you need to do to build a playable instrument. Volumes 1 and 2 are complete and ready, and I am working on the others.

The videos are available on my website at RMGreen Videos - Instructional Videos for Woodworking, CNC, Guitar Building

Here are a couple of youtube videos promoting the DVDs.

[nomedia="http://www.youtube.com/watch?v=C5tOYWfhuyM"]YouTube - DVD Volume 2: CNC Guitar Machining[/nomedia]
[nomedia="http://www.youtube.com/watch?v=yBn4Asm4Ces"]YouTube - Guitar Modeling Introduction[/nomedia]

Scott...

[Perfect Circle]

Awsome!!

[bbuzz]

Can't wait to view the videos.

Hmmm. RMGreen Videos - Instructional Videos for Woodworking, CNC, Guitar Building site seems to be down.

Videos in youtube are promissing indeed

[bobsch]

Can't wait to view the videos.

Hmmm. RMGreen Videos - Instructional Videos for Woodworking, CNC, Guitar Building site seems to be down.

Videos in youtube are promissing indeed

I just tried it and it's working now.

[sagreen]

I just tried it and it's working now.

Sorry about that. My hosting provider was blinking out. Hope that doesnt happen a lot !

Scott...

[bbuzz]

Sorry about that. My hosting provider was blinking out. Hope that doesnt happen a lot !

Scott...

Seems fine now. Thanks Scott.

[GuitarsMatrix]

Hi guys, just wanted to get any feedback from peoples who actually purchased the videos?

[sagreen]

Just wanted to drop a line on this forum and let you know that I am in the process of creating an instructional video series dedicated to modeling and building a guitar using Aspire (Vectric software) and a CNC machine. There will be a total of 5 videos in the set, Volumes 1-2 cover body modeling and machining, 3-4 will cover neck modeling and machining, Volume 5 will cover finishing and assembly. The goal is to take a stack of wood and parts, and show you everything you need to do to build a playable instrument. Volumes 1 and 2 are complete and ready, and I am working on the others.

The videos are available on my website at RMGreen Videos - Instructional Videos for Woodworking, CNC, Guitar Building

Here are a couple of youtube videos promoting the DVDs.




Scott...

Just thought I'd let everyone know I've changed my domain name to something that makes more sense for me long term.
Please visit the new site at RMGreen Videos - Instructional Videos for Woodworking, CNC, Guitar Building

Thanks!
Scott Green
RMGVideos