MASTERCAM X5 STRAT BODY TOOL PATHS

[robwiacek]

Ok,
So now I have a bunch of files to cur 2D. I just bought a SOLIDS Training book to learn the 3D steps. Problem is there are NO tips on how to actually make the cuts once you draw them.
IE: I need to draw and cut that arm relief in the top of a Strat and the Hip relief in the back of a Strat and a Deluxe Tele or any guitar. THen of course, the radii on a neck both top and bottom.
I'd be glad to send you FREE CORIAN for direct help. I have Neck files, but cant figure out the f=drawing and tool path.

Similar Threads:

• Newbie- Not able to see tool paths
• Need Help!- Contour cut on guitar body STRAT, P BASS ETC...MC X5
• Cutting a Strat body on a Larken 2424 router
• Need Help!- sheet body tool paths
• Route Paths Disappearing Mastercam 9

[bostosh]

This is easy, do you still need help?

[louieatienza]

Prototype semi-hollow Strat style body I designed for a local builder. Made two of these so far.

[bostosh]

Very Kool, I have to do a similar insides for a customers guitar.
This is my latest in billet

[louieatienza]

Ok,
So now I have a bunch of files to cur 2D. I just bought a SOLIDS Training book to learn the 3D steps. Problem is there are NO tips on how to actually make the cuts once you draw them.
IE: I need to draw and cut that arm relief in the top of a Strat and the Hip relief in the back of a Strat and a Deluxe Tele or any guitar. THen of course, the radii on a neck both top and bottom.
I'd be glad to send you FREE CORIAN for direct help. I have Neck files, but cant figure out the f=drawing and tool path.

What CAM software do you have? You'll need some capable of 3D work...