- The latest from KOZM Guitars
-
Registered
The latest from KOZM Guitars
I haven’t posted here for awhile. Thought it would be good to show what I’m up to these days.
Here’s a look at the guitar I’m currently working on, the KOZM “Performer LS”.
Custom hard-tail bridge.
Non-floating magnetic pick-up.
24.75” scale length.
Body woods, front: Alaskan yellow cedar, torrified maple, big leaf maple in the middle.
Body wood, back: Mahogany
The elliptical hole is for inserting the strings through the hard-tail bridge system.
The knobs are 3D printed (Objet). The left, tone knob will be a push-pull - which will toggle the Joe Barden S-Deluxe mini-humbucker from "coils in parallel" to "coils in series".
Here's a cutaway view of the body, showing the support structure for the non-floating p-up mount. Mounting the p-up from the back of the guitar should reduce the amount of feedback, and not weigh-down or hinder the soundboard from vibrating.
SolidWorks, VisualCADCAM (MecSoft), ShopSabre CNC, WinCNC
All comments and questions appreciated.
Cheers,
Jeff Kosmoski
KOZM Guitars
Similar Threads:
-
-
Member
Re: The latest from KOZM Guitars
Hello Jeff,
If you give us some video you design in SW and cnc machining from beginning to end that would be good. Your 3d guitar is very interesting..
-
Registered
-
Member
Re: The latest from KOZM Guitars
Wow! That's just amazing work there, Jeff!
I'm blown away by the beautiful job you've done on the guitar.
cheers, Ian
- The latest from KOZM Guitars
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules