I have an Astro-Vector Knee Mill with control software issues. I did not recieve any software with this machine when purchased. This mill worked great for 6 months, then I shut it down 1 evening and it would not boot back into the control program the next morning. This company is no longer in business and I have not found anyone who has any information for the controls. The control is based in DOS 6.22, , it has an GALIL DMC1030 card-- BALDOR LINE DRIVES --BALDOR SERVO MOTORS.I would like to upgrade this control to a newer Windows OS. All the info I have found the control program has to be written for this machine. This is a problem for me because I am not a programmer. I hope someone can help me out.
Try Al_The_Man he has knowledge on Gailil cards.