Control Upgrade Info


Results 1 to 2 of 2

Thread: Control Upgrade Info

  1. #1
    Registered
    Join Date
    Nov 2006
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Control Upgrade Info

    I have an Astro-Vector Knee Mill with control software issues. I did not recieve any software with this machine when purchased. This mill worked great for 6 months, then I shut it down 1 evening and it would not boot back into the control program the next morning. This company is no longer in business and I have not found anyone who has any information for the controls. The control is based in DOS 6.22, , it has an GALIL DMC1030 card-- BALDOR LINE DRIVES --BALDOR SERVO MOTORS.I would like to upgrade this control to a newer Windows OS. All the info I have found the control program has to be written for this machine. This is a problem for me because I am not a programmer. I hope someone can help me out.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Oct 2005
    Location
    USA
    Posts
    105
    Downloads
    0
    Uploads
    0

    Default

    Try Al_The_Man he has knowledge on Gailil cards.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Control Upgrade Info

Control Upgrade Info