Help -Mulitcam 84 plus Motherboard needed

[solscenic]

Hello

We have a multicam 84 plus CNC machine built around 1997. We currently run enroute on that machine. The machine stopped running fri evening and we had mulitcam out yesterday to look at it.

Concenses: We need a new motherboard.

Multicam wants to do a complete overhaul and I just want to replace what we had and keep working.

Any suggestions would be helpful.

[barbque]

It just so happens that I have a mother board from a multicam 84 from 1996. I just chucked it the trash the other day. I would be happy to dig it out. This came off of a retro fit so it could still be good. If you pick up shipping its yours.

Kris

[MCPservice]

Barbque: What other parts do you have from that retrofit....looking to pick up some older Multicam parts.

[solscenic]

Hi Kris- I think that you just became my new best friend!!!

I will happily pay for shipping.

Feel free to contact me via assistant@solscenic.com or 407-352-1444 office

Btw we are in FL. Where are you?

[barbque]

Barbque: What other parts do you have from that retrofit....looking to pick up some older Multicam parts.

Unfortunatly the mother board and controler was all that I had left. The router had taken alot of abuse. Every one of the bearings and linear rail bearing block was shot years ago. Sorry I couldn't be more help.

Kris

[spcantu]

Our machine is actually a 48plus. (I work with solscenic for clarification) It has a M23 mainboard. While I certainly appreciate the mainboard offered, It will definitely not be a "Plug and Play" fix.
Does anyone know of someone who repairs these boards?

[MCPservice]

Can you tell me what the machine is not doing....is it not booting up, better yet give me a call....the name is Maurice, I was a Multicam tech...I might be able to help...


678-466-7942
Mcp Service...