need help Multicam 1000


Results 1 to 2 of 2

Thread: need help Multicam 1000

  1. #1
    Registered
    Join Date
    Jan 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default need help Multicam 1000

    I have a Multicam 1000 and am having issues with an apparent air seal leak inside the motor head. When the machine starts to operate, the air pressure at the line coming into the machine drops to 50 psi, the dust collector will not retract as designed, and the machine looses the ability to retract and reattach tooling. Any ideas out there on where to start to fix this problem?

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: need help Multicam 1000

    I think you answered your own question. If the seal in the rotary union in the spindle motor is leaking, then the only fix is to rebuild or replace the rotary union. It's time to tear it down and locate the problem. It could be a simple fix, or not. Depends on how bad things are torn up in there.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need help Multicam 1000

need help Multicam 1000