Mori MV- Junior Overtravel?

[lcornwell]

Hi Guys,
Today working with a Mori Seiki MV Junior it is a 1986 model and accidentaly overtraveled on the x axis. We cannot figure out how to fix this and are in need of help!! If anyone knows how to do this or has an idea it would be greatly apreciated!!

Thanks abunch!

Logan

[lcornwell]

Oh and it has an MX2 Controller. Thanks.

[underthetire]

Press and hold the OT switch, located usually on the side of the pendant. While holding, press control on, and reset. Once the EMG clears, manually move the axis off with the handwheel. One special note, some VERY early machines did not come with a OT button, they had alligator clips and a wire you had to jump in the back. Those were usually MV35's though.

[lcornwell]

Press and hold the OT switch, located usually on the side of the pendant. While holding, press control on, and reset. Once the EMG clears, manually move the axis off with the handwheel. One special note, some VERY early machines did not come with a OT button, they had alligator clips and a wire you had to jump in the back. Those were usually MV35's though.

Thank You!! You just saved my butt, really appreciate it!!