New to this forum. Does anyone know how to take this alarm off? Or does anybody have the parameters for this alarm? I don't have the manuals anymore. I think a repair guy stole my book. Thanks for your help!
Thanks for the help. I'll let you know if it works.
Thanks again for your help, Andy. A repair guy is working on it before I had a chance to input the commands. He's not here now. I'll keep you posted on its status.
Why a repair guy? With that sent by andy it's a 10 minute job.
did not see that post, would have to agree with underthetire, tel him bye, bye
So long story short: I'm waiting for the repair guy to come and replace whatever switch he had taken off.
That alarm has NOTHING to do with a switch that i've ever seen. That would be a ATC cycle time over alarm. He is screwing you if he is changing a switch for that alarm.
I need to talk to him (in-house guy) tomorrow and see what the deal is. I'll keep you guys in the loop.
Or you can go to the DGN page, DGN 7200 & 7202 and key in 0 for both.
I need help I have an alarm POWER OFF AT ATC OR STEP and on the screen is active instruction LSK and won't let me make movements, already modify parameters 6006 and 7099 but won't let me run any instruction, help please I have a week stop the machine
Set DGN 7200 & 7202 to 0. If they are already 0, then use the ATC return cycle in the manual.