I am looking for contacts that utilize Esprit software to program machines, preferably millturn or multitasking machines. I just need some feedback on the program and it's operations..
I work for a Mori dealer, we use esprit to program all the turn key setups we do and for time studies. I just started here, so I'm relatively new to Esprit, but I've found it pretty easy to learn. I'm currently working on a time study on an NT (five axis mill turn) with sub spindle and lower turret. I came from using FeatureCAM, the environment is much different. Esprit is not quite as auotmated, which is good from the standpoint that you have alot of control over the toolpath, and is also layers based, took me a while to get used to that. I'm still not quite used to the layers, but I'm getting it.