Code for parts catcher on a Mori Seiki CL-20

[Nevronplastics]

Hello,
I need the code for a mori CL-20 parts catcher with a Yasnac LX3 controller. I think its a 1995 or 1996. All i have is a oil logged manual. Thanks......

[underthetire]

For some reason, m75, m76 sticks in my head. Not positive though. M codes are in the back of the ladder diagram.

[fordav11]

we have a CL20 at my work and it uses M37 and M38 for the parts catcher. The machine-specific M-codes can be assigned to any unused number. you really need to look them up in the Mori manual or in MDI just start typing Mxx and press START and see what happens. It can't hurt anything. If the code is wrong or non-existent you'll just get an 'Illegal M-code' alarm. press reset to clear the alarm and keep typing until you hit the right M-code

[Nevronplastics]

Thanks guys. Someone PMed me with M73 up, M74 down. Thanks again for the help.

[underthetire]

I was only off by one set. How's that for memory....