Let me know
I have moved an MV Junior from one end of the country to the other. It has an Fanuc O M control on it, it's about 1985ish vintage. When I give it an M29 and a spindle speed to turn on rigid tapping, it rotates in reverse, 8 1/8 turns before it continues on tapping. It didn't do this before the move. What I did find was that there were several parameters that were different when I first turned it on here, eg. Japanese messages etc.
Any help with this problem would be greatly appreciated.
Let me know
I have an mv junior , i never thought about trying to rigid tap on it i thought it was too old,i think its late 80's machine i cant remember the exact age.
I have parameters from this but it has a 10m control not the 0m so they would be no good.
Just my thoughts but the machines i have had that rigid tap do just like you say is happening now , they rotate what looks like erratic until they sync.
Oh and change the batteries before you loose more parameters !!
email me if you need my parameter listing ( firstname.lastname@example.org )
Don't think a 85ish machine would have a OM, would be 10 or 11M. OM would be very late 80's, early 90's I think. Not all ridged tap parameters are in the control, the C series drive on a OM would have parameters as well.