MV Junior servo removal

[PBr]

Hi,

We've bought a MV JR mill and we need to remove the X axis servo due to a small door. I loose the 4 small screws around the coupling, but the motor didn't move. Does anyone know how to remove it?

[underthetire]

Remove cables, remove M10 SHCS holding the motor flange on, loosen 4 M10 Head hex bolts on coupling. Smack coupling with a hammer and BRASS drift. Remove motor. The couplings are a collet style, and can be sticky to break loose.

[PBr]

Thanks, done. Interresting they don't use a flexible coupling.