| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mori lathes Discuss Mori lathes here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-13-2009, 07:38 PM
| |||
| |||
I have an SL15 Mori with Yasnac LX3 control and the x axis has the minus on the the top of the stroke and plus on the bottom. This is the reverse of most other machines and makes programing a problem for us. I have a friend that has 3 Mori's just like ours and the X axis are in the normal configuration (plus at top minus at bottom). I need help with finding the parameters to change this machine to be the same as our other turning center or a post processor file for Mastercam that uses this reversed x axis. We can add minus signs to the program but the G2 and G3s are also reversed. Big pain in the rear.  |
|
#2
07-20-2009, 10:44 PM
| |||
| |||
1. CHANGE THE FOLLOWING PARAMETERS: A. 6010.6 1 B. 6600 12000 6606 -262000 C. PC PRM 7000.7 0 2. CHECK THE CN2 CONNECTOR ON THE X AXIS MOTOR, MAKE SURE THAT FOLLOWING PINS ARE NOT SHORTED PINS 1, 2, 3, AND 7 Hope this helps! |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mori Seiki MV45 Yasnac MX1 Help Please | premier_industr | G-Code Programing | 6 | 10-21-2011 04:59 AM |
| MORI SL-3A YASNAC 2000B CONTROL | JY`S MACHINE | Mori lathes | 5 | 05-04-2010 10:09 AM |
| Mori Seiki SL2 With YASNAC | Antonio Arguijo | Mori Mills | 3 | 06-26-2009 06:20 PM |
| Mori Seiki MV45 Yasnac MX1 Help Please | premier_industr | General CNC (Mill and Lathe) Control Software (NC) | 2 | 12-05-2008 09:14 AM |
| Mori Jr with Yasnac MX2, a little help | dannystooblue | Mori Mills | 7 | 09-23-2008 10:00 PM |
| | |
Linear Mode
