SL3 with fanuc OTA

[rooster57]

I am looking for a bit of help with the reverse JIS spec on this machine. A friend of mine had purchased an older SL 3 with a Fanuc OTA control. He wants to reverse the X axis for neg movement to Xo from home. I have a parameter list for this but i am having an issue with one if the parameters 8122. it seems this is the rotation change for X where i only change the sign- i assume. The parameters on my sheet are as follows .
0003.0
700
704
8122
22.0
500.7
So i cant find an 8122 could some one direct me as to how to locate this parameter please. Also are my list of parameters complete to reverse X ???

Thanks Guys for the Help

[underthetire]

I have the procedure for earlier controls, never seen a 0 on a sl3. Never seen one past a 10/11.

[drdos]

You have an analog servo system. Parameter 8122 is used for digital only.

[LSR_SERVICE]

Dear sir
resently purchased used this type mori seiki SL-3,FANUC OTA control machine under problem pl send
me electrical diagram any manual,


suresh
e.mail-LSR_service@oneindia.in