| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mori lathes Discuss Mori lathes here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-17-2011, 07:42 AM
| |||
| |||
Hey Mori Gurus, I'm working on a Mori DH-15Y machine with a problem on the Head 2 servo turret. I need to recover the #1 position and have a procedure sent from the local Mori distributor. Unfortunately it doesn't work as written and the distributor will not offer any support. Do any of you guys have an accurate recovery procedure I can get a copy of? (Mori DH15-Y w/ MSC 516 control) Any help will be appreciated. emexcee380  |
|
#2
06-23-2011, 08:08 AM
| |||
| |||
Sorry guys............That's a Mori DL-15Y Anybody ever replaced the four clamping pistons in the turret? One of the nuts on one of the pistons backed off and jammed the turret and broke the end of the piston shaft. A disassembly procedure would be helpful Thanks, emexcee380 |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| mori turret spinning | claya | Mori lathes | 28 | 07-30-2011 01:39 AM |
| Need Help!- Mori MT200SZ lower turret | Green Button | Mori lathes | 1 | 06-09-2011 09:28 AM |
| Mori AL-2 Turret Indexing and X Home Problem | krfrea | Mori lathes | 4 | 01-03-2011 12:59 PM |
| Mori SL3-H Turret alignment | JL Fabrication | Mori lathes | 0 | 07-23-2009 08:26 PM |
| Mori Seiki SL 0H turret | tapserv | Mori lathes | 4 | 01-20-2008 01:01 PM |
| | |
Linear Mode
