Need Help!- Mori Seiki SL-2 parameters

[amadeo_ortiz]

Does Anyone can help me, because we made a mistake changing the Battery of my Mori Seiki SL-2 and we must to plug the new battery in the 3CN before unplug de old one from 2CN and now the follow codes are on my CRT:

400 SEQ ERROR2
175 MEM ERROR (MACR)
174 MEM ERROR (KEEP)
173 MEM ERROR (PRM)
172 MEM ERROR (SET)

Can anyone help me because we haven´t operation manual and maintenance manual, I only have the Yasnac LX1 controller manual and i´ve read about it and everybody say that i need to reenter parameters, I really need your help!

Or any idea about release those Alarms from my Lathe..

this is a Mori Seiki SL-2 with Yasnac LX1

[DouglasR]

I strongly suggest going on ebay and searching manuals out there.

[amadeo_ortiz]

I´ve watching a pair of post on eBay but both are for MoriSeiki´s SL-3 and mine is a SL-2 i don´t know if take a risk of buy one of there... does anyone can sell to me this info for my SL-2. My email is: amadeo_ortiz@hotmail.com Or do you think that it can fit with my case because i guess too than all LX1 for SL series are similar, but think about machine sizes, we should never unplug this battery LOL thanks for you help man!

[DouglasR]

as long as the control is the same it shouldn't make too much difference.

[Waynno]

I can get that parameter set and post it here tomorrow.

You may have to do a regeneration reset of the entire control to get rid of any corrupt data, Now is the time to do just that

Wayne

[underthetire]

I have the tech sheet on how to reverse x axis if you need it. A lot of early machines were converted to x- machines to match the really old machines. Factory was x+.

[amadeo_ortiz]

Originally Posted by Waynno I can get that parameter set and post it here tomorrow. You may have to do a regeneration reset of the entire control to get rid of any corrupt data, Now is the time to do just that Wayne

I really appreciate your Help Wayne, if you need my email is: amadeo_ortiz@hotmail.com Thanks a lot man!!

[amadeo_ortiz]

Originally Posted by underthetire I have the tech sheet on how to reverse x axis if you need it. A lot of early machines were converted to x- machines to match the really old machines. Factory was x+.

How to do that? I don´t know if this is possible on my machine, but i can do if you recommend it !

[Waynno]

Parameter list for SL-2H

N6000 X 32
N6001 X 129
N6002 X 128
N6003 X 17
N6004 X 2
N6005 X 70
N6006 X 20
N6007 X 68
N6008 X 0
N6009 X 192
N6010 X 49
N6011 X 0
N6012 X 0
N6013 X 0
N6014 X 0
N6015 X 0
N6016 X 0
N6017 X 131
N6018 X 0
N6019 X 32
N6020 X 7
N6021 X 12
N6022 X 131
N6023 X 0
N6024 X 68
N6025 X 0
N6026 X 7
N6027 X 25
N6028 X 7
N6029 X 25
N6030 X 0
N6031 X 1
N6032 X 14
N6033 X 85
N6034 X 0
N6035 X 92
N6036 X 92
N6037 X 0
N6038 X 0
N6039 X 65
N6040 X 255
N6041 X 63
N6042 X 3
N6043 X 250
N6044 X 98
N6045 X 102
N6046 X 31
N6047 X 123
N6048 X 34
N6049 X 0
N6050 X 12
N6051 X 12
N6052 X 0
N6053 X 0
N6054 X 0
N6055 X 0
N6056 X 64
N6057 X 64
N6058 X 0
N6059 X 0
N6060 X 0
N6061 X 0
N6062 X 0
N6063 X 0
N6064 X 0
N6065 X 0
N6066 X 0
N6067 X 0
N6068 X 0
N6069 X 0
N6070 X 0
N6071 X 0
N6072 X 0
N6073 X 0
N6074 X 64
N6075 X 64
N6076 X 0
N6077 X 0
N6078 X 0
N6079 X 0
N6080 X 8
N6081 X 15
N6082 X 0
N6083 X 3
N6084 X 6
N6085 X 10
N6086 X 0
N6087 X 0
N6088 X 0
N6089 X 0
N6090 X 0
N6091 X 0
N6092 X 25
N6093 X 10
N6094 X 7
N6095 X 10
N6096 X 0
N6097 X 0
N6098 X 0
N6099 X 0
N6100 X 0
N6101 X 0
N6102 X 0
N6103 X 0
N6104 X 0
N6105 X 0
N6106 X 0
N6107 X 0
N6108 X 0
N6109 X 0
N6110 X 0
N6111 X 0
N6112 X 0
N6113 X 0
N6114 X 23
N6115 X 24
N6116 X 51
N6117 X 52
N6118 X 0
N6119 X 0
N6120 X 0
N6121 X 0
N6122 X 0
N6123 X 0
N6124 X 0
N6125 X 0
N6126 X 0
N6127 X 0
N6128 X 0
N6129 X 0
N6130 X 0
N6131 X 0
N6132 X 0
N6133 X 0
N6134 X 0
N6135 X 0
N6136 X 0
N6137 X 0
N6138 X 0
N6139 X 0
N6140 X 0
N6141 X 0
N6142 X 0
N6143 X 0
N6144 X 0
N6145 X 0
N6146 X 0
N6147 X 0
N6148 X 0
N6149 X 0
N6160 X 0
N6161 X 0
N6162 X 0
N6163 X 0
N6164 X 0
N6165 X 0
N6166 X 0
N6167 X 0
N6168 X 0
N6169 X 0
N6170 X 0
N6171 X 0
N6172 X 0
N6173 X 0
N6174 X 0
N6175 X 0
N6176 X 0
N6177 X 0
N6178 X 0
N6179 X 0
N6180 X 0
N6181 X 0
N6182 X 0
N6183 X 0
N6184 X 0
N6185 X 0
N6186 X 0
N6187 X 0
N6188 X 0
N6189 X 0
N6190 X 0
N6191 X 0
N6192 X 0
N6193 X 0
N6194 X 0
N6195 X 0
N6196 X 0
N6197 X 0
N6198 X 0
N6199 X 0
N6200 X 0
N6201 X 0
N6202 X 500
N6203 X 500
N6204 X 0
N6205 X 0
N6206 X 0
N6207 X 0
N6208 X 0
N6209 X 0
N6210 X 0
N6211 X 0
N6212 X 0
N6213 X 0
N6214 X 0
N6215 X 0
N6216 X 0
N6217 X 0
N6218 X 0
N6219 X 0
N6220 X 40
N6221 X 0
N6222 X 800
N6223 X 0
N6224 X 40
N6225 X 0
N6226 X 0
N6227 X 0
N6228 X 9600
N6229 X 0
N6230 X 10
N6231 X 128
N6232 X 0
N6233 X 0
N6234 X 3
N6235 X 4
N6236 X 6
N6237 X 8
N6238 X 12
N6239 X 20
N6240 X 30
N6241 X 40
N6242 X 60
N6243 X 80
N6244 X 120
N6245 X 200
N6246 X 300
N6247 X 400
N6248 X 600
N6249 X 800
N6250 X 1200
N6251 X 2000
N6252 X 3000
N6253 X 4000
N6254 X 0
N6255 X 0
N6256 X 0
N6257 X 0
N6258 X 0
N6259 X 0
N6260 X 0
N6261 X 0
N6262 X 0
N6263 X 0
N6264 X 0
N6265 X 0
N6266 X 1310
N6267 X 4000
N6268 X 0
N6269 X 0
N6270 X 0
N6271 X 1310
N6272 X 4000
N6273 X 0
N6274 X 0
N6275 X 30
N6276 X 0
N6277 X 0
N6278 X 0
N6279 X 0
N6280 X 1280
N6281 X 1280
N6282 X 0
N6283 X 0
N6284 X 0
N6285 X 0
N6286 X 50
N6287 X 50
N6288 X 0
N6289 X 0
N6290 X 0
N6291 X 0
N6292 X 0
N6293 X 0
N6294 X 0
N6295 X 0
N6296 X 0
N6297 X 0
N6298 X 0
N6299 X 0
N6300 X 0
N6301 X 0
N6302 X 0
N6303 X 0
N6304 X 3410
N6305 X 2654
N6306 X 0
N6307 X 0
N6308 X 0
N6309 X 0
N6310 X 40
N6311 X 40
N6312 X 0
N6313 X 0
N6314 X 0
N6315 X 0
N6316 X 20
N6317 X 20
N6318 X 0
N6319 X 0
N6320 X 0
N6321 X 0
N6322 X 0
N6323 X 0
N6324 X 0
N6325 X 0
N6326 X 0
N6327 X 0
N6328 X 0
N6329 X 0
N6330 X 0
N6331 X 0
N6332 X 0
N6333 X 0
N6334 X 0
N6335 X 0
N6336 X 0
N6337 X 0
N6338 X 0
N6339 X 0
N6340 X 0
N6341 X 0
N6342 X 0
N6343 X 2600
N6344 X 430
N6345 X 2000
N6346 X 15
N6347 X 0
N6348 X 0
N6349 X 0
N6500 X 0
N6501 X 0
N6502 X 0
N6503 X 0
N6504 X 0
N6505 X 0
N6506 X 0
N6507 X 0
N6508 X 0
N6509 X 0
N6510 X 0
N6511 X 0
N6512 X 0
N6513 X 0
N6514 X 0
N6515 X 0
N6516 X 0
N6517 X 0
N6518 X 0
N6519 X 0
N6520 X 0
N6521 X 0
N6522 X 0
N6523 X 0
N6524 X 0
N6525 X 0
N6526 X 0
N6527 X 0
N6528 X 0
N6529 X 0
N6530 X 0
N6531 X 0
N6532 X 0
N6533 X 0
N6534 X 0
N6535 X 0
N6536 X 0
N6537 X 0
N6538 X 0
N6539 X 0
N6540 X 0
N6541 X 0
N6542 X 0
N6543 X 0
N6544 X 0
N6545 X 0
N6546 X 0
N6547 X 0
N6548 X 0
N6549 X 0
N6550 X 0
N6551 X 0
N6552 X 0
N6553 X 0
N6554 X 0
N6555 X 0
N6556 X 0
N6557 X 0
N6558 X 0
N6559 X 0
N6560 X 0
N6561 X 0
N6562 X 0
N6563 X 0
N6564 X 0
N6565 X 0
N6566 X 0
N6567 X 0
N6568 X 0
N6569 X 0
N6570 X 0
N6571 X 0
N6572 X 0
N6573 X 0
N6574 X 0
N6575 X 0
N6576 X 0
N6577 X 0
N6578 X 0
N6579 X 0
N6600 X 263200
N6601 X 49780
N6602 X 0
N6603 X 0
N6604 X 0
N6605 X 0
N6606 X- 56800
N6607 X- 360220
N6608 X 0
N6609 X 0
N6610 X 0
N6611 X 0
N6612 X 0
N6613 X 0
N6614 X 0
N6615 X 0
N6616 X 0
N6617 X 0
N6618 X 0
N6619 X 0
N6620 X 0
N6621 X 0
N6622 X 0
N6623 X 0
N6624 X 0
N6625 X 0
N6626 X 0
N6627 X 0
N6628 X 0
N6629 X 0
N6630 X 0
N6631 X 0
N6632 X 0
N6633 X 0
N6634 X 0
N6635 X 0
N6636 X 0
N6637 X 0
N6638 X 0
N6639 X 0
N6640 X 0
N6641 X 0
N6642 X 0
N6643 X 0
N6644 X 0
N6645 X 0
N6646 X 0
N6647 X 0
N6648 X 0
N6649 X 0
N6650 X 0
N6651 X 0
N6652 X 0
N6653 X 0
N6654 X 0
N6655 X 0
N6656 X 0
N6657 X 0
N6658 X 0
N6659 X 0
N7000 X 12
N7001 X 1
N7002 X 0
N7003 X 0
N7004 X 0
N7005 X 0
N7006 X 1
N7007 X 1
N7008 X 0
N7009 X 0
N7010 X 0
N7011 X 0
N7012 X 0
N7013 X 0
N7014 X 0
N7015 X 1
N7016 X 0
N7017 X 0
N7018 X 0
N7019 X 0
N7020 X 0
N7021 X 0
N7022 X 0
N7023 X 0
N7024 X 1
N7025 X 0
N7026 X 0
N7027 X 0
N7028 X 0
N7029 X 0
N7030 X 2
N7031 X 0
N7032 X 0
N7033 X 0
N7034 X 0
N7035 X 0
N7036 X 0
N7037 X 0
N7038 X 0
N7039 X 0
N7040 X 0
N7041 X 0
N7042 X 3
N7043 X 6
N7044 X 5
N7045 X 10
N7046 X 12
N7047 X 9
N7048 X 18
N7049 X 20
N7050 X 17
N7051 X 34
N7052 X 36
N7053 X 33
N7054 X 0
N7055 X 0
N7056 X 0
N7057 X 0
N7058 X 0
N7059 X 0
N7060 X 50
N7061 X 80
N7062 X 12
N7063 X 0
N7064 X 0
N7065 X 0
N7066 X 0
N7067 X 50
N7068 X 16
N7069 X 8
N7070 X 5
N7071 X 10
N7072 X 0
N7073 X 0
N7074 X 0
N7075 X 0
N7076 X 0
N7077 X 0
N7078 X 80
N7079 X 0
N7080 X 0
N7081 X 0
N7082 X 0
N7083 X 0
N7084 X 0
N7085 X 0
N7086 X 0
N7087 X 0
N7088 X 0
N7089 X 0
N7090 X 0
N7091 X 2
N7092 X 0
N7093 X 0
N7094 X 0
N7095 X 8
N7096 X 0
N7097 X 0
N7098 X 0
N7099 X 0
N8000 X 0
N8001 X 0
N8002 X 0
N8003 X 0
N8004 X 0
N8005 X 0
N8006 X 0
N8007 X 0
N8008 X 0
N8009 X 0
N8010 X 0
N8011 X 0
N8012 X 0
N8013 X 0
N8014 X 0
N8015 X 0
N8016 X 0
N8017 X 0
N8018 X 0
N8019 X 0
N8020 X 0
N8021 X 0
N8022 X 0
N8023 X 0
N8024 X 0
N8025 X 0
N8026 X 0
N8027 X 0
N8028 X 0
N8029 X 0
N8030 X 0
N8031 X 0
N8032 X 0
N8033 X 0
N8034 X 0
N8035 X 0
N8036 X 0
N8037 X 0
N8038 X 0
N8039 X 0
N8040 X 0
N8041 X 0
N8042 X 0
N8043 X 0
N8044 X 0
N8045 X 0
N8046 X 0
N8047 X 0
N8048 X 0
N8049 X 0
N8050 X 0
N8051 X 0
N8052 X 0
N8053 X 0
N8054 X 0
N8055 X 0
N8056 X 0
N8057 X 0
N8058 X 0
N8059 X 0
N8060 X 0
N8061 X 0
N8062 X 0
N8063 X 0
N8064 X 0
N8065 X 0
N8066 X 0
N8067 X 0
N8068 X 0
N8069 X 0
N8070 X 0
N8071 X 0
N8072 X 0
N8073 X 0
N8074 X 0
N8075 X 0
N8076 X 0
N8077 X 0
N8078 X 0
N8079 X 0
N8080 X 0
N8081 X 0
N8082 X 0
N8083 X 0
N8084 X 0
N8085 X 0
N8086 X 0
N8087 X 0
N8088 X 0
N8089 X 0
N8090 X 0
N8091 X 0
N8092 X 0
N8093 X 0
N8094 X 0
N8095 X 0
N8096 X 0
N8097 X 0
N8098 X 0
N8099 X 0
N8100 X 0
N8101 X 0
N8102 X 0
N8103 X 0
N8104 X 0
N8105 X 0
N8106 X 0
N8107 X 0
N8108 X 0
N8109 X 0
N8110 X 0
N8111 X 0
N8112 X 0
N8113 X 0
N8114 X 0
N8115 X 0
N8116 X 0
N8117 X 0
N8118 X 0
N8119 X 0
N8120 X 0
N8121 X 0
N8122 X 0
N8123 X 0
N8124 X 0
N8125 X 0
N8126 X 0
N8127 X 0
N8128 X 0
N8129 X 0
N8130 X 0
N8131 X 0
N8132 X 0
N8133 X 0
N8134 X 0
N8135 X 0
N8136 X 0
N8137 X 0
N8138 X 0
N8139 X 0
N8140 X 0
N8141 X 0
N8142 X 0
N8143 X 0
N8144 X 0
N8145 X 0
N8146 X 0
N8147 X 0
N8148 X 0
N8149 X 0
N8150 X 0
N8151 X 0
N8152 X 0
N8153 X 0
N8154 X 0
N8155 X 0
N8156 X 0
N8157 X 0
N8158 X 0
N8159 X 0
N8160 X 0
N8161 X 0
N8162 X 0
N8163 X 0
N8164 X 0
N8165 X 0
N8166 X 0
N8167 X 0
N8168 X 0
N8169 X 0
N8170 X 0
N8171 X 0
N8172 X 0
N8173 X 0
N8174 X 0
N8175 X 0
N8176 X 0
N8177 X 0
N8178 X 0
N8179 X 0
N8180 X 0
N8181 X 0
N8182 X 0
N8183 X 0
N8184 X 0
N8185 X 0
N8186 X 0
N8187 X 0
N8188 X 0
N8189 X 0
N8190 X 0
N8191 X 0
N8192 X 0
N8193 X 0
N8194 X 0
N8195 X 0
N8196 X 0
N8197 X 0
N8198 X 0
N8199 X 0
N8200 X 0
N8201 X 0
N8202 X 0
N8203 X 0
N8204 X 0
N8205 X 0
N8206 X 0
N8207 X 0
N8208 X 0
N8209 X 0
N8210 X 0
N8211 X 0
N8212 X 0
N8213 X 0
N8214 X 0
N8215 X 0
N8216 X 0
N8217 X 0
N8218 X 0
N8219 X 0
N8220 X 0
N8221 X 0
N8222 X 0
N8223 X 0
N8224 X 0
N8225 X 0
N8226 X 0
N8227 X 0
N8228 X 0
N8229 X 0
N8230 X 0
N8231 X 0
N8232 X 0
N8233 X 0
N8234 X 0
N8235 X 0
N8236 X 0
N8237 X 0
N8238 X 0
N8239 X 0
N8240 X 0
N8241 X 0
N8242 X 0
N8243 X 0
N8244 X 0
N8245 X 0
N8246 X 0
N8247 X 0
N8248 X 0
N8249 X 0
N8250 X 0
N8251 X 0
N8252 X 0
N8253 X 0
N8254 X 0
N8255 X 0
N8600 X 0
N8601 X 0
N8602 X 0
N8603 X 0
N8604 X 0
N8605 X 0
N8606 X 0
N8607 X 0
N8608 X 0
N8609 X 0
N8610 X 0
N8611 X 0
N8612 X 0
N8613 X 0
N8614 X 0
N8615 X 0
N8616 X 0
N8617 X 0
N8618 X 0
N8619 X 0
N8620 X 0
N8621 X 0
N8622 X 0
N8623 X 0
N8624 X 0
N8625 X 0
N8626 X 0
N8627 X 0
N8628 X 0
N8629 X 0
N8630 X 0
N8631 X 0
N8632 X 0
N8633 X 0
N8634 X 0
N8635 X 0
N8636 X 0
N8637 X 0
N8638 X 0
N8639 X 0
N8640 X 0
N8641 X 0
N8642 X 0
N8643 X 0
N8644 X 0
N8645 X 0
N8646 X 0
N8647 X 0
N8648 X 0
N8649 X 0
N8650 X 0
N8651 X 0
N8652 X 0
N8653 X 0
N8654 X 0
N8655 X 0
N8656 X 0
N8657 X 0
N8658 X 0
N8659 X 0
N8660 X 0
N8661 X 0
N8662 X 0
N8663 X 0
N8664 X 0
N8665 X 0
N8666 X 0
N8667 X 0
N8668 X 0
N8669 X 0
N8670 X 0
N8671 X 0
N8672 X 0
N8673 X 0
N8674 X 0
N8675 X 0
N8676 X 0
N8677 X 0
N8678 X 0
N8679 X 0
N8680 X 0
N8681 X 0
N8682 X 0
N8683 X 0
N8684 X 0
N8685 X 0
N8686 X 0
N8687 X 0
N8688 X 0
N8689 X 0
N8690 X 0
N8691 X 0
N8692 X 0
N8693 X 0
N8694 X 0
N8695 X 0
N8696 X 0
N8697 X 0
N8698 X 0
N8699 X 0
N8700 X 0
N8701 X 0
N8702 X 0
N8703 X 0
N8704 X 0
N8705 X 0
N8706 X 0
N8707 X 0
N8708 X 0
N8709 X 0
N8710 X 0
N8711 X 0
N8712 X 0
N8713 X 0
N8714 X 0
N8715 X 0
N8716 X 0
N8717 X 0
N8718 X 0
N8719 X 0
N8720 X 0
N8721 X 0
N8722 X 0
N8723 X 0
N8724 X 0
N8725 X 0
N8726 X 0
N8727 X 0
N8728 X 0
N8729 X 0
N8730 X 0
N8731 X 0
N8732 X 0
N8733 X 0
N8734 X 0
N8735 X 0
N8736 X 0
N8737 X 0
N8738 X 0
N8739 X 0
N8740 X 0
N8741 X 0
N8742 X 0
N8743 X 0
N8744 X 0
N8745 X 0
N8746 X 0
N8747 X 0
N8748 X 0
N8749 X 0
N8750 X 0
%

[underthetire]

Originally Posted by amadeo_ortiz How to do that? I don´t know if this is possible on my machine, but i can do if you recommend it !

I don't recommend one way or the other. What I have seen is parameters get lost, someone puts in factory parameters to get the machine running, then X axis is all buggered up. If this ends up being the case, then PM me and I can email the set up sheet.

[Waynno]

Originally Posted by underthetire I don't recommend one way or the other. What I have seen is parameters get lost, someone puts in factory parameters to get the machine running, then X axis is all buggered up. If this ends up being the case, then PM me and I can email the set up sheet.

What would be buggered up? Only thing I can think of would be centerline
adjustment for zero return and backlash settings

Do you have procedure for drive adjustment? One of mine was fiddled with
when I got that machine, and has never sounded like it is tuned correct

Thanks

Wayne

[underthetire]

Originally Posted by Waynno What would be buggered up? Only thing I can think of would be centerline adjustment for zero return and backlash settings Do you have procedure for drive adjustment? One of mine was fiddled with when I got that machine, and has never sounded like it is tuned correct Thanks Wayne

Zero return will go wrong direction, there was some wiring, I think it was for the tach, tool presetter, jog stick. Soft limits parameter as well. Was about 5 things that had to be changed. I'll look for drive tuning procedure tonight, i don't remember seeing it in my data file, but it could be there.