Hello and and thank you in advance. While working in another location we had cad/cam to program C-X axis contouring. In this new location, only have cad/cam for 3 axis mills. Has anyone used G12.1 to run X and Y code on NL2000MC ( no Y ). When I posted code in the past, always used G112 and G113. I did talk with the Mori dealer and he sent me a page from the book, naturally he has not used it. The book reads G12.1 with a D and E value. For example:

G12.1 D0 E=C

I just cannot get the D and E to run thru. If I fire G12.1 it does reads thru the Y commands but does not move or error out. If I do not fire G12.1, the control will puke on the Y commands.

I would be very thankful for some help and or an example. Thanks again.