- Mori Seiki SH50 alarm 414 Servo Alarm
-
Registered
Mori Seiki SH50 alarm 414 Servo Alarm
Good day, we have a problem with a Mori Seiki SH-50 with controlled MSC 516, it presents the alarms:
414 Servo Alarm : Y axis detect error
414 Servo Alarm : X axis detect error
But only present this alarms when pass a few time with main power off like a 45 min or more, the solution we find its turn on main power, left on for 30 min or more then turn main power off and turn on and the alarm disappear, but sometimes take much more time to reset the alarm, anyone knows how can fix this problem, thanks.
Similar Threads:
-
-
Member
Re: Mori Seiki SH50 alarm 414 Servo Alarm
I know this is and old thread, but the 414 alarm is just telling you that there is a problem with the servo amp. Next time it happens take a look at the servo amp/s and post the alarm number of the servo amp plus the part number and we can go from there. If my guess is correct the part number should be A06B-6079-Hxxx.
- Mori Seiki SH50 alarm 414 Servo Alarm
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules