- NVX 5100/50 the spindle broke down.
-
Registered
NVX 5100/50 the spindle broke down.
This year we bought NVX 5100/50 with Celos. After 8 days of hard work the spindel broke down. During the milling the nut which hold the die tool loosened. This caused the formation of the axial force and broke the bearings of the spindle. Fortunately the machine is under warranty and the service in Poland works quite well. They fixed this very quickly. Did anybody have similar issue with the NVX machine ?
Similar Threads:
-
-
Registered
Re: NVX 5100/50 the spindle broke down.
Is this a NVX5000 or a Dura Vertical 5100? I don't think there is a NVX5100, but I could be wrong.
- NVX 5100/50 the spindle broke down.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules