Yasnac MX1 Options


Results 1 to 7 of 7

Thread: Yasnac MX1 Options

  1. #1
    Registered
    Join Date
    Jul 2011
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Yasnac MX1 Options

    How do you turn on the 4th Axis Option?

    Thanks for your help!

    Kent

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2009
    Location
    usa
    Posts
    6028
    Downloads
    0
    Uploads
    0

    Default

    4th axis is WAY more than just an option parameter. You need the drive, cables, 4th axis, parameter set up to control the 4th axis properly. Don't ever remember having to turn on an option parameter installing a 4th.



  3. #3
    Registered
    Join Date
    Jul 2011
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default 4th Axis

    This is a 1985 Mori Seiki MV80 VMC w/ Yasnac MX1. It has the driver, cables, and 20" Koma Rotary Table. But the Parameters are not there. When you go to the recommended address, no bits are shown. I suspect someone took the rotary table off at some time and just didn't re-install it properly.



  4. #4
    Member
    Join Date
    Feb 2009
    Location
    usa
    Posts
    6028
    Downloads
    0
    Uploads
    0

    Default

    I'll see what I have when I get home.



  5. #5
    Member DouglasR's Avatar
    Join Date
    Jul 2005
    Location
    United States
    Posts
    380
    Downloads
    0
    Uploads
    0

    Default

    Most likely, everything is still in the CNC, but the additional axis address is switched off. When I bought my P&W (read Hamai) TriMac VMC it had a 15" Tsdokoma table that they wanted to keep. So when I got the machine, I had to go into IPL mode and tell it that it was a 3 axis VMC and not a 4 axis. Once I did that, the additional drivers and boards went into a "standby mode" and the machine operated normally. That was 10 years ago, never had a problem.



  6. #6
    Member
    Join Date
    May 2008
    Location
    us
    Posts
    84
    Downloads
    0
    Uploads
    0

    Default Re: 4th Axis

    Do you have the parameters you can send me? We are trying to set up a 4th axis.

    Quote Originally Posted by kgimachinetool View Post
    This is a 1985 Mori Seiki MV80 VMC w/ Yasnac MX1. It has the driver, cables, and 20" Koma Rotary Table. But the Parameters are not there. When you go to the recommended address, no bits are shown. I suspect someone took the rotary table off at some time and just didn't re-install it properly.




  7. #7
    Member
    Join Date
    Apr 2013
    Location
    mexico
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: Yasnac MX1 Options

    Quote Originally Posted by kgimachinetool View Post
    How do you turn on the 4th Axis Option?

    Thanks for your help!

    Kent
    Do you still need this information?



  8. #8
    Member AyLMF010510's Avatar
    Join Date
    Aug 2016
    Location
    Apodaca
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by rodrigomex View Post
    Do you still need this information?
    I need information, please



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Yasnac MX1 Options

Yasnac MX1 Options