- Mori Seiki MV 35/40 Tool changer problems
-
Registered
Mori Seiki MV 35/40 Tool changer problems
It didn't orient before the tool changed, I manually dropped the arm down and the tool fell out of the spindle. Now I can't get the tool to clamp and since I powered it down to try and reset it it won't home out either. It moves in Y and X but not Z, it is not over traveled I got it about 3 inches off the home position. Anyone know how to get the tool to clamp manually. The solenoid will close it but not keep it closed. I am also stuck in M31 it won't let me do an M32 to get out of it. Any ideas?
Thanks!
Mark
Similar Threads:
-
-
Registered
Which control do you have?
-
Registered
If you have Fanuc 6M, I may be able to send you info.
- Mori Seiki MV 35/40 Tool changer problems
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules