Mori Seiki MV 35/40 Tool changer problems


Results 1 to 3 of 3

Thread: Mori Seiki MV 35/40 Tool changer problems

  1. #1
    Registered cmmachining's Avatar
    Join Date
    Feb 2008
    Location
    us
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Mori Seiki MV 35/40 Tool changer problems

    It didn't orient before the tool changed, I manually dropped the arm down and the tool fell out of the spindle. Now I can't get the tool to clamp and since I powered it down to try and reset it it won't home out either. It moves in Y and X but not Z, it is not over traveled I got it about 3 inches off the home position. Anyone know how to get the tool to clamp manually. The solenoid will close it but not keep it closed. I am also stuck in M31 it won't let me do an M32 to get out of it. Any ideas?

    Thanks!
    Mark

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2011
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Which control do you have?



  3. #3
    Registered
    Join Date
    Aug 2010
    Location
    USA
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default

    If you have Fanuc 6M, I may be able to send you info.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mori Seiki MV 35/40 Tool changer problems

Mori Seiki MV 35/40 Tool changer problems